Do you know the installation method of knife scraping cloth?

The knife scraper has high strength, good stability and surface cleaning characteristics, and has anti-aging properties. The products are widely used in large-scale outdoor advertising systems, wide-format digital printing and construction, canopies, inflatable materials and other fields. The knife scraper is suitable for all kinds of solvent-based inkjet printers and has a wide range of applications. The following is the introduction of the application scope and installation of the LINYANG knife scraper. The knife scraper is a chemical synthetic material, and its thickness is thicker than ordinary lamp cloth. The front of the scraper cloth is flexible and smooth, the back is rough, and the granularity is thick and uneven. Knife scraping cloth is divided into high-gloss surface and matte surface, mainly because of the different scope of application. Knife scraping cloth is generally used for coating canopies, light boxes, background boards, wide advertising paintings in public places, etc. This unique property makes this material widely used in the large-format, high-end fine commodity market. The chemical properties of the material determine that it has strong ink adsorption, and can adhere with high strength under oily or water-based ink conditions. So what are the precautions for the use of the knife scraper? As a common advertising material, the knife scraper should first clean the body when using it, and then dry it after cleaning. After selecting the position to be pasted, use the tool to scrape off the backing paper while scraping it, and repeat the scraping several times. The wet sticking method is suitable for car stickers with transparent transfer film. Roll-up products should not be used outdoors, such as temporary need to be placed outdoors, and it is best to put a heavy object behind the base; this can try to ensure that the external environment does not damage the product. The chemical properties of the blade cloth make it have good ink adsorption capacity. Both water-based and oil-based inks can be highly absorbed and adhered. This method is mainly to stir raw materials such as liquid plasticizers and PVC powder, and then subject them to high temperature and pressure. The light box cloth produced in this way has a flat surface and uniform light transmission. The advantage is obvious when using the inner light. Use and installation method 1. Rotate the foot about 90 degrees and put it down. 2. Peel off the sticky paper on the guide plate of the drawing shaft, and align and paste the picture. Be sure to align both ends and stick them flat. 3. Open the plastic cover at one end of the hanging picture strip, pull out the hard core strip in the middle, fold it and put it in the metal tube, and then cover the plastic cover. 4. Press and hold the bottom, hold the painting strip by hand, pull out the ring latch, and put the picture into the“Roll up”. 5. When using, take out the three-fold metal rod and connect it well, insert a section of the metal rod into the“Roll up”At the opening, slowly pull out the picture, hook the picture strip, and hook it on the top of the metal rod to complete. 6. If you want to change the screen, just pull out the screen, insert the latch into the original fixing hole, fix the screen, and then repeat steps 1 to 4 to complete. Pay attention to the problem: The roll-up logo should not be used outdoors. If it needs to be placed outdoors temporarily, try to choose a roll-up with a better base, and it is best to put a heavy object behind the base, so as to ensure that the external environment is not damaged as much as possible product. Due to the temperature, the sides of the screen may be curled, so when not in use for a long time, be sure to put the screen away and save it well. However, this problem has been greatly improved after improvement in recent years, so don't worry too much. When in use, take out the three-fold metal rod and connect it well, insert a section of the metal rod into the“Roll up”At the opening, slowly pull out the picture and hook it on the top of the metal rod. If you want to replace the screen, just pull out the screen, insert the latch into the original fixing hole, fix the screen, and then repeat steps 1 to 4 to complete. The L-shaped frame is the same as the first two. When it is supporting the picture, the picture is made of PP, which is used for photo or silk screen printing, and the deviation between the picture effect and the design draft is small.