Learn the performance of pvc blister film from pvc blister film manufacturers

The pvc blister film can not only be attached to the surface, but also can be vacuum compressed. It is widely used in furniture, cabinets, and decoration industries, and the processing is very simple, the setting effect is good, and the surface is smooth. No need to spray paint on the surface, it has good water resistance, corrosion resistance, and is easy to clean. Let's learn the performance of pvc blister film together with pvc blister film manufacturers. The production process of pvc blister film is not complicated. The ordinary production line is generally composed of a rolling machine, a printing machine, a back coater and a cutting machine. A film with a thickness of only 0.3 mm to 0.7 mm is produced, and at the same time of production, the front side of the film is printed with a color by a printing machine, and a layer of back coating is attached to the back of the film by a back coater. But don't underestimate this layer of back coating, it is an important guarantee for the high-quality performance of pvc blister film. The back coating is composed of special materials and is a high-energy affinity agent. It is precisely because of this back coating that the PVC film can be tightly integrated with the MDF or other boards, and it will not be glued for ten or even fifteen years. The biggest problem of ordinary veneer is that it cannot solve the problem of film falling off. Since the whole production process is carried out at high temperature (the temperature in the rolling machine reaches 220 degrees), this makes the pvc blister film with high light resistance and fire resistance, ensuring the high quality of the pvc blister film. Of course, this is very demanding on production machines. But on the other hand, the production process of pvc blister film is quite simple, and the output of the machine is also large. Therefore, from a comprehensive perspective, PVC is actually a low-input, high-yield product. Extraordinary performance What is the difference between pvc blister film and ordinary adhesive film? Ordinary adhesive film is directly attached to the surface of the board with glue at room temperature, so after one or two years, the film is easy to fall off. The pvc blister film is attached to the surface of the board at a high temperature of 110 degrees by a special vacuum laminator, so it is not easy to fall off. Although pvc blister film has excellent quality assurance, some people may say that PVC is a chemical product after all, it is not comparable to natural materials, it cannot eliminate toxicity and odor, and it will inevitably cause harm to the environment. This is not the case. This is because the raw materials of pvc blister film manufacturers are specially refined, and the toxic substances are completely extracted, so PVC is completely non-toxic and tasteless, and has no effect on human skin or respiratory system. Any irritation, furniture or kitchenware wrapped in pvc blister film is perfect for those who are allergic to wood and paint. PVC blister film is not easy to fold white, has low shrinkage, less crystal impurities compared to other products, and has good flatness, clear color, good waterproof and moisture-proof performance, good flame retardant performance, good weather resistance, Strong stamping resistance, wear-resistant, good blister flat laying effect, if exposed to indoor and outdoor, it is not easy to fade, vacuum blister does not eliminate lines, no white edges and so on. The above is the performance of the pvc blister film that the pvc blister film manufacturer told us, I hope it can be helpful to everyone.

When you find yourself in need of PVC Film pvc plastic film, you may not know where to begin. And that's OK! Search out ZHONGSHAN LINYANG PLASTIC CO.LTD to handle your PVC Tarpaulin needs.

To know more about PVC Film clear pvc film, visit LINYANG PVC Tarpaulin Film for more reviews, tips and advice. ZHONGSHAN LINYANG PLASTIC CO.LTD won't let you down for your options. visit!

ZHONGSHAN LINYANG PLASTIC CO.LTD clearly knows that people often launch something and love it and want to go on and on about it, but that's too normal and mediocre. There are lots of other competing products, so we need to keep it very, very unique.