Application of PVC blister film and wood grain film

PVC blister film and wood grain film are widely used in decorative boards, furniture and so on. It can be used for surface veneer and vacuum forming. It is quick to use and process, with good shape and bright surface. No need to spray paint on the surface, it has the advantages of water resistance, corrosion resistance and easy cleaning. It is a new type of environmentally friendly decorative material. Its characteristics: this kind of product (PVC blister film) does not fold white, small shrinkage, less crystal impurities, good flatness, clear color, waterproof and moisture-proof, good flame retardancy, good weather resistance, strong stamping resistance, Wear-resisting, good blister flat sticking effect, not easy to fade in indoor and outdoor exposure, vacuum blister will not eliminate lines, no white edges and so on. Types: The textures of wood grain chips include walnut, cherry, oak, beech, maple, teak, pine, sandalwood, rosewood, etc. Each wood grain has several colors to choose from. Thickness of PVC blister film: 0.30mm, 0.35mm, 0.40mm, 0.45mm Width: 1400mm Length: about 100m per roll The storage environment temperature must be between 5°C and 30°C, below 5°C will cause flocculation. Glue buckets should not be placed directly on the ground, but should be placed on wooden brackets, especially in winter. The validity period of the blister is 6 months from the date of delivery when the original packaging is not removed. The proportion of plastic absorbing agent: curing agent u003d 20:1. When mixing the main agent and the curing agent, the main agent should be kept in a stirring state, and the curing agent should be slowly added and stirred for at least 3 minutes. The amount of glue prepared each time should be used up within 4 hours. After mixing the glue, the glue bucket should be tightly covered. Glue spray process requirements: The glue spray sequence is end face - front line type - front + line type - end face, the plane part can be sprayed once; the end face and the plane line type need to be sprayed twice. The active time after mixing the main agent and curing agent is 4-6 hours, and the workpiece that has been sprayed should be processed within 4 hours to obtain the best gluing effect. Otherwise, the activation temperature needs to be increased due to the cross-linking reaction of the glue. Although the gluing effect is good in appearance, the temperature resistance has been significantly reduced. If the glue is sprayed twice, glue marks will appear on the surface of the PVC film. After spraying, the surface is whitish and dry, and it is not sticky to the hand or has a clear gloss after drying. The drying time is 30-50 minutes (depending on the temperature, humidity and spray quality of the environment). Application prospects of PVC blister film and wood grain film: (1) Since the product is free to choose (up to 215 types, the specifications can be freely customized according to customer needs, no need to paint the surface, which saves your processing cost to a certain extent ). The shape is good, the surface is bright, the color is rich, the color is pure and bright, and the wood grain is realistic. With water resistance, corrosion resistance, scratch resistance, long-term use without deterioration. (4) It is easy to clean and suitable for all households. It has become the mainstream panel of European cabinets and is gradually favored by domestic users. It is the best new environmentally friendly decorative material in the 21st century. The above is the introduction of the relevant knowledge of PVC blister film and wood grain film. Hope that helps.

ZHONGSHAN LINYANG PLASTIC CO.LTD highlighted the need to foster a human openness to technological innovation.

ZHONGSHAN LINYANG PLASTIC CO.LTD will continue to bring our industry nuances of style and approaches to PVC Film which are consistent with our evolving aspirations.

clear pvc film PVC Tarpaulin are primarily used for pvc plastic film.

On top of making sure all our day-to-day operations are running smoothly, ZHONGSHAN LINYANG PLASTIC CO.LTD needs to ensure that we're keeping up with all the quality standards of PVC Film.

You will have a clear pvc film that looks pvc plastic film all the time, Because your is handling with it.