What three defenses should be done for fireproof and thermal insulation at the construction site?

The construction site fireproof and thermal insulation quilt is literally a kind of thermal insulation quilt. This is a kind of thermal insulation material used in the construction environment. The main features are flame retardant, waterproof and thermal insulation. After the construction site is covered with insulation, a waterproof membrane should be covered on it. After snowing, the snow should be sorted out in time and then rolled up. In case of frost or frost mist, let the sun shine for a while before rolling up. If the plastic film of the waterproof greenhouse is damaged, the thermal insulation quilt and the waterproof film may be frozen in strong cold weather. At this moment, let the sun shine for a period of time until the ice cubes are rolled up after hydration. The overlap between the two beds should not be less than 10cm when the thermal insulation quilt is placed. If it goes wrong during use, it should be adjusted in time. The thermal insulation quilt should pay attention to prevent it from getting wet when it rains. When the thermal insulation quilt covers the lower end of the greenhouse, if there is water on the ground, the accumulated water should be cleaned up in time to prevent the intrusion of the thermal insulation quilt. In the daily transportation process, the construction site insulation quilt should be handled with care, and it is strictly forbidden to drag it to avoid unnecessary damage. In addition, the thermal insulation is made three-proof to deal with the sun and rain. The fireproof and thermal insulation quilt on the construction site is a test for us to cope with the harsh working soil environment and the quality of our work. In the rainy season, we should remove the greenhouse waterproof thermal insulation quilt in time after it rains, and put it in a sunny and dry place for sun exposure. Otherwise, it will be easily soaked by rainwater, which is not conducive to the maintenance and maintenance of the thermal insulation quilt. After the insulation is covered, the east and west walls of the shed should be fixed and pressed tightly to prevent the wind from blowing and reducing the insulation effect. When not in use, we should keep the greenhouse insulated in the sun and then roll it up for storage. Pay attention to store it in an open and dry place, and avoid prolonged exposure to sunlight. Now the editor wants to tell you about the construction site insulation quilt. I wonder if you have understood it? Here we take a look! 1. Rainproofing Waterproofing is an important indicator for evaluating thermal insulation quilts on construction sites. At present, most thermal insulation quilts have good waterproof performance. However, there are still some thermal insulation quilts that are not waterproof. Therefore, before the thermal insulation is rolled up and not used, it should be dried first, and covered tightly with a non-damaged film, and the surrounding of the thermal insulation quilt should be cleaned up to avoid water from soaking the thermal insulation quilt from the bottom. Once the cover is blown away by the wind and the rainwater soaks the thermal insulation quilt, it should be dried and covered tightly in time. 2. Anti-sunlight Most of the construction site thermal insulation quilts are black or dark brown, which is easy to absorb light and generate heat. In summer, the light is strong. If the material is not covered and only wrapped with film, the dark insulation will absorb heat and release slowly, and the internal temperature can even rise to above 70 °C, which significantly accelerates its aging speed. Therefore, after the thermal insulation is rolled up, it should be covered with a waterproof material such as a film first, and then covered with a light-shielding material such as a non-woven fabric. 3. Windproof In summer, the rain is often accompanied by strong winds, and the rolled up insulation quilt is easily blown away by the wind or blown off the roof. It is necessary to check the fixation of the insulation quilt in time to avoid being blown away by the strong wind. Especially after strong winds, it is necessary to check the preservation of insulation in time, and solve problems in time. Therefore, the thermal insulation quilt is not only the type of greenhouse thermal insulation quilt, but also has the application of thermal insulation quilt in many places, such as engineering construction. In the construction of various projects, the concrete facilities are equipped with thermal insulation measures for the purpose of preventing cold and freezing. The thermal insulation quilt is one of the thermal insulation measures. The construction site thermal insulation quilt is easy to install, practical, low in price, moderate in weight, long in service life and reusable. Therefore, it has been recognized by the engineering thermal insulation market and has become a popular thermal insulation equipment in the market. We all know that the role of the thermal insulation quilt on the construction site is to keep warm, so once the thermal insulation quilt is found to be damaged, it must be corrected in time. To repair the thermal insulation quilt, first find the damaged area and then use a special spray gun to correct the damaged area. The selected repair agent is a polyurethane material with low polymer density, which can stick to the damaged wound in a very short time, and will not waste production. time for work.