What should I pay attention to when installing the knife scraper?

Knife scraping cloth is a new type of chemically synthesized advertising material. Its thickness is thicker than that of traditional ordinary materials. Due to its unique material properties, this material is widely used for advertising. Strong ink adsorption, can adhere with high strength under the condition of oily or water-based ink. In the process of installation and use, what should we pay attention to to better install the knife scraper? Before use, it should be cleaned first, and then dried after cleaning. After selecting the position to be pasted, use the tool to scrape off the backing paper while scraping it, and repeat the scraping several times. The wet sticking method is suitable for car stickers with transparent transfer film. Roll-up products should not be used outdoors, such as temporary need to be placed outdoors, and it is best to put a heavy object behind the base; this can try to ensure that the external environment does not damage the product. Rotate the feet about 90 degrees and place them down. Peel off the sticky paper on the guide plate of the drawing shaft, align the picture and stick it well, be sure to align the two ends and stick it flat. Open the plastic cover at one end of the picture hanging strip, pull out the hard core strip in the middle, fold it, put it in the metal tube, and then cover the plastic cover. Press down firmly on the bottom, hold the painting strip by hand, pull out the ring latch, and put the picture in“Roll up”. When in use, take out the three-fold metal rod and connect it well, insert a section of the metal rod into the“Roll up”At the opening, slowly pull out the picture, hook the picture strip, and hook it on the top of the metal rod to complete. If you want to replace the screen, just pull out the screen, insert the latch into the original fixing hole, fix the screen, and then repeat steps 1 to 4 to complete.