What should be paid attention to when using rain cloth for trucks?

The use of tarpaulins on trucks has become commonplace. Almost every large truck we see will have this tarpaulin. The tarpaulin can not only protect against rain, but also prevent dust pollution, etc. It is one of the important parts of the truck, then What should we pay attention to when using the rain cloth? Let's take a look with the editor of LINYANG Canvas Factory! 1. The rope of the rain cloth must be tied to the T-shaped iron of the truck, and cannot be tied to other parts. 2. The folded place in the middle of the tarpaulin needs to be reinforced: the corner (waist) ropes of the tarpaulin in the middle of the vehicle are respectively pulled diagonally to the opposite direction. 3. The tarpaulin corner ropes at both ends of the truck are staggered along the end wall of the truck and then tied to the two T-shaped irons at the end of the truck. When the angle rope passes through the brake platform of the human brake of the truck, it should be decided from above it; when it passes through the brake lever and the hook lever, it should pass through the inside of it. 4. The two end ropes in the middle of the tarpaulins at both ends of the truck are respectively pulled down vertically and tightly tied to the two T-shaped irons at the end of the vehicle. When the hook rod is lifted, it should also pass through the inner side. 5. The pressure rope at each end of the tarpaulin should be pressed tightly against the corners of the tarpaulin, so that the tarpaulin is closely attached to the end wall of the vehicle, and tied to the second T-shaped iron on the side of the vehicle, and must not be tied to the end beam and the end beam. On the T-shaped iron at the end of the car side. 6. The waist rope should be pulled straight and tied to the T-shaped iron on the side of the truck. When loading, the stretched length of the elastic part of the elastic rope shall not be less than 320mm. When using D-type rain cloth, if there is a T-shaped iron in the middle of the vehicle, the waist rope in the middle is tied to the T-shaped iron in the middle of the vehicle; if there is no T-shaped iron in the middle of the vehicle, the waist rope in the middle of the rain cloth is respectively tied to the T-shaped iron in the middle of the vehicle. . Other waist ropes, starting from the two ends of the vehicle, towards the middle of the vehicle, are tied to the corresponding T-shaped irons in sequence. When the elastic bar is not close to the eye rim, the elastic rope should be retracted from the middle, and the excess rope in the middle should be folded and tied with two dead knots. 7. The rainproof cloth rope adopts the bow knot method or the turning head knot method. The rope end after the connection should be wound around its own rope rod, and at least two dead knots should be tied. The length of the head and tail of the rope shall not be higher than 280mm and not shorter than 120mm. 8. Except for the rain cloth with its own rope and the rain cloth rope net, no other ropes shall be used to bind the rain cloth. Well, the above is the method and matters of using the tarpaulin on the truck. I believe everyone has a certain understanding after reading it. If you want to know more information on the tarpaulin, feel free to come to LINYANG customer service!

ZHONGSHAN LINYANG PLASTIC CO.LTD has various branches in local businesses, servicing customers and helping to pull in traffic to those businesses.

Click LINYANG PVC Tarpaulin Film for super quality from one of the state's premier producers.

ZHONGSHAN LINYANG PLASTIC CO.LTD's core technology of PVC Film enables us to understand and utilize in a right way.

ZHONGSHAN LINYANG PLASTIC CO.LTD has developed a unique technology with many applications including clear pvc film.

ZHONGSHAN LINYANG PLASTIC CO.LTD provides innovative technology and prompts our customers to know the development of our producing PVC Tarpaulin.