Use the right materials and methods when repairing damaged tarpaulins

The number of plastic tarpaulin wholesale markets is also gradually increasing. However, sometimes we find that the plastic tarpaulins bought in the wholesale market will leak. Why? There are two main reasons for this phenomenon, namely: 01 Plastic tarpaulin leaking is usually caused by poor stitches, accidentally hooked or pierced with holes, and if the stitches are leaking, It can be remedied by using glue appropriately. Usually, it is enough to apply special glue to the seam at this time. 02 is a little troublesome if it is hooked. If the tarpaulin is a new tarpaulin that has just been bought, then it can be bonded with a heat gun and glue; however, if it is an old tarpaulin, then heat sealing and glue will not work, and only glue and glue can be used. Sewing. Adhesives are usually used when repairing plastic sheds. However, there are several points that cannot be ignored in the application of such adhesives: (1) For solvent-based products, after gluing, it must be It is advisable to let it cool until it is not too sticky, and then glue it. (2) One-component solvent type or water type, must be stirred evenly when using, in order to make the strength higher, try to leave it for 24 hours after bonding. (3) If you want high strength and fast curing, you can heat it according to the situation. When applying glue, it should not be too thick. Generally, 0.5mm is better. The thicker the bonding effect, the worse the bonding effect. When bonding objects, try to apply pressure or Secure with clamps. (4) When the adhesive is used, it must be prepared and used, and it must not be left for too long. If it is fast curing, it should not exceed 2 minutes. (5) In order to achieve high bonding strength, the adherend should be polished as much as possible, and the quality of the bonding joint design determines the bonding strength. (6) The adherend must be cleaned without moisture (except for underwater curing glue). (7) For the adhesive of component AB, please mix according to the requirements of the manual when mixing, and be sure to stir well before use. No dead corners can be left, otherwise it will not cure.

ZHONGSHAN LINYANG PLASTIC CO.LTD is dedicated to servicing our customers with a wide array of high-quality service and products.

LINYANG provides supreme quality and ultimate using experience.To know in detail about the prices please visit LINYANG PVC Tarpaulin Film.

Our company is professional in selling PVC Film as well as providing a series of relevant services.

People are more likely to listen to an expert than just anyone off the street. So, while pack mentality is important, having a relevant expert speak to the effectiveness of a brand's product as LINYANG is essential to converting new consumers as well.

To stay in contact for latest review of PVC Tarpaulin clear pvc film across the globe and find out quality products, just go to LINYANG PVC Tarpaulin Film.