Truck tarpaulin installation precautions

Trucks cannot be parked casually, especially on highways. Therefore, truck tarpaulins are required when consigning goods. However, how to tie the tarpaulins is a technical task, which is related to the safety of driving, so everyone needs to pay special attention to it. of attention. The tarpaulin shall not be covered with the tarpaulin when the cargo loading height is more than 1m above the end side wall or the gondola with the escort riding on it. Tarpaulins and tarpaulin rope nets shall not be used as cargo reinforcement materials. Therefore, the goods that need to be reinforced must be bundled and reinforced before the tarpaulin is covered. There are no residues of old rope ends, iron wires and other wastes on the rope of the truck. 1. When the loading height of the goods is lower than the side wall of the vehicle end, the tarpaulin bracket can be placed, and anti-wear measures should be taken at the contact between the protruding part of the bracket and the tarpaulin. When the thatch cover is easy to damage the goods of the tarpaulin, anti-wear or protective measures should be taken between the tarpaulin and the goods. 2. Avoid collision with sharp metal quick openings during use, especially for new tarpaulins, it is best to cover the bottom with old cloths for proper protection to prevent the tarpaulins from being damaged by iron in the carriage. 3. The tarpaulin thatch cover is flat and no cargo is exposed. The top is ridged, the corners at both ends are closely attached, and the size of each part does not exceed the limit. 4. The cloth body is complete, no damage, the eye circle is intact, and the marks and numbers are complete and clear. The rope is complete, complete, without joints, firmly plugged, and correctly connected with the tarpaulin. 5. The rope is tied and tied in the correct position, the knot is firm, the force is even, and there is no slack and fall off, so as to prevent local cracks in the tarpaulin when the vehicle is driven at high speed by the wind. The rope tied to the rope is in a butterfly-shaped knot, and the length of the head and the tail is 10~30cm. 6. The sagging height of the tarpaulin on both sides of the truck should be the same. One end of the tarpaulin of the truck manpower brake hangs down to cover the height of the end wall of 300mm to 500mm, and the other end hangs down to cover the height of the end wall of about 600mm. 7. Tighten the tarpaulin corner rope to make the tarpaulin corner unfold inward into a triangle, flatten both sides of the tarpaulin corner and then fold it to the end wall of the truck, wrap the corner tightly at both ends of the vehicle so that the pressing rope presses the corner. 8. The tarpaulins on both sides of the vehicle sag at the same height, the lines on both sides are smooth, the rear side is flat and tightened, and the car number is exposed.

Building a brand as LINYANG from the very start is simple so long as you keep 'the three C's' in mind: clarity, consistency and constancy.

have become more diverse in appearance and function thanks to the advanced technology. Choose a that you can trust to deliver an excellent user experience reliable performance at LINYANG PVC Tarpaulin Film.

We sells PVC Film and focus on operational procedure and manufacturing facilities pvc plastic film.

need fuel for energy,while clear pvc film do not.

A wholesaler should have many pvc plastic film based products that could help you if you have a clear pvc film problem. It is better to treat the problem early rather than have to deal with it later. ZHONGSHAN LINYANG PLASTIC CO.LTD is your best choice.