The support and fixation of tarpaulin

Today, the editor of Zhongshan tarpaulin manufacturer ZHONGSHAN LINYANG PLASTIC CO.LTD will take you to see the support and fixation of tarpaulins. If the conditions are met, a floor mat can be placed under the tent, and the pvc tarpaulin can not only protect the bottom of the tent, but also achieve the best waterproof effect. When supporting the outer tent, in addition to the reliable connection with the tent pole, special attention should be paid to pulling the leash to make the outer tent taut, so as to facilitate the outer tent to achieve the best rain resistance. For tents with skirts, use soft soil or sand pressure. Well, snow pressure can also be used in winter, which is more conducive to wind protection. The fixing of the ground nails should have an inclination angle, and the angle should be 35-45 degrees. The distance and direction of the ground nails into the ground should be the same axis as the reining rope. The reining rope and the ground nails form a 90-degree angle. reach the maximum strength. In the order of fixing, attention should be paid to the corresponding fixing, for example: first the left front corner, then the right rear corner, the right front corner, and the left rear corner. After the entire tent is fixed, adjust the pulling rope to make the pulling force in all aspects consistent. After setting up the tent, check the distance between the inner and outer tents. If they are attached together, it will affect the rain and dew protection. You should adjust the tarpaulin in Zhongshan and go to ZHONGSHAN LINYANG PLASTIC CO.LTD. Keywords: Zhongshan tarpaulin, pvc tarpaulin, plastic tarpaulin

There are a wide variety of which are scientifically tested to have positive effects on the ability to clear pvc film. pvc plastic film PVC Tarpaulin is one of them.

To live healthy, you need to eat healthy; to eat healthy, you need to think healthy; to think healthy, you need to read health; to read healthy, you need to follow LINYANG PVC Tarpaulin Film.

ZHONGSHAN LINYANG PLASTIC CO.LTD can reassign work or shuffle around assigned tasks if one team member is overwhelmed while others are not, more effectively managing resources on the fly. With detailed overviews and reports, manufacturers also can more easily stay abreast of new developments.