Tent pole troubleshooting and cleaning tips

Using tents on weekdays will inevitably stain its surface, especially products like outdoor advertising tents, which have bright appearance and bright colors. If there are stains, it will look ugly and affect the appearance. How do you clean a tent to remove stains without damaging the tent surface? Tent manufacturers teach you how to clean tents. Wash it with water (don't wash it), wipe it with a rag (don't use hard things such as brushes, it will destroy the waterproofness of the outer layer), and it can only be put away after the scrubbing is completed; The gauze-shaped inner tent is white, not resistant to dirt and difficult to wash. You can use detergent such as washing powder when washing, but it should be rinsed clean. If you don't want to have a relatively large musty smell when you travel next time, then dry it and put it away. Add camphor essence and put it away. For hard-to-clean items such as carbon ink, do not touch the white canvas. When the white canopy surface is cleaned, find two clean white papers to cover the top of the canopy surface, and remove the white paper after drying, so as to prevent the canopy surface from discoloring; or apply a layer of toothpaste on the surface of the canvas, or white chalk powder. To spread evenly, and then dry, it will also prevent discoloration. Outdoor advertising tents are carried in the form of components and assembled after arriving at the site. The main purpose of the poles is to support the tents and protect them from the wind and rain. Therefore, the strut requires good toughness and high elasticity, and should not be broken. The distinction between good and bad is mainly reflected in this. When the tent pole fails, we can only take some emergency measures to deal with it when we are outside. First, polish the sharp part of the section to avoid damage to the tent cloth and repair tape. Secondly, rotate the support rod so that the damaged part is perpendicular to the bending direction of the tent pole, that is, the tent pole is generally bent up and down, where the upper force is large, and it should be damaged and disposed of on the left and right. Afterwards, wrap the splices and damaged areas tightly with the sturdy tape you carried. It should be noted that the emergency measures for outdoor advertising tents are only expedient measures, which are measures we take without immediate maintenance tools, and should be repaired as soon as possible. The current design of the folding tent is very user-friendly and scientific, and its installation method is very simple, but some people do not know how to install it quickly when using it, so I will explain the process for everyone. 1. Take the tent stand and the top cloth out of the carton. When unpacking, be careful not to use a knife to avoid scratching the inside; 2. Open the tent frame by 50%; The four feet of the tent are aligned with the four feet of the tent frame, and stick to the Velcro; 4. Pull the frame apart by 95%; 5. There are four spring buckles on the feet of each tent frame, which are buckled on the square tube that can move up and down. If it is very heavy in the eyes, use the shoulder strength to operate the four feet in the same way; 6. Pull out the four inner tubes of the chassis, and the height will be automatically buckled, so that the installation of the tent is completed.