Tarpaulin manufacturers remind truck tarpaulin installation precautions

Trucks cannot be parked casually, especially on highways. Therefore, truck tarpaulins are required when consigning goods. However, how to tie the tarpaulins is a technical task, which is related to the safety of driving, so everyone needs to pay special attention to it. of attention. The tarpaulin shall not be covered with the tarpaulin when the cargo loading height is more than 1m above the end side wall or the gondola with the escort riding on it. Tarpaulins and tarpaulin rope nets shall not be used as cargo reinforcement materials. Therefore, the goods that need to be reinforced must be bundled and reinforced before the tarpaulin is covered. There are no residues of old rope ends, iron wires and other wastes on the rope of the truck. 1. When the loading height of the goods is lower than the side wall of the vehicle end, the tarpaulin bracket can be placed, and anti-wear measures should be taken at the contact between the protruding part of the bracket and the tarpaulin. When the thatch cover is easy to damage the goods of the tarpaulin, anti-wear or protective measures should be taken between the tarpaulin and the goods. 2. Avoid collision with sharp metal openings during use, especially for new tarpaulins, try to use old cloths to cover the bottom for proper protection to prevent the wear of the tarpaulins caused by the iron in the carriage. 3. The tarpaulin thatch cover is flat and no cargo is exposed. The top is ridged, the corners at both ends are closely attached, and the size of each part does not exceed the limit. 4. The cloth body is complete, no damage, the eye rims are intact, the marks and numbers are complete and clear, the ropes are complete, complete, without joints, the plug is firm, and the connection with the tarpaulin is correct. 5. The rope is tied and tied in the correct position, the knot is firm, the force is even, and there is no slack and fall off, so as to prevent local cracks in the tarpaulin when the vehicle is driven at high speed by the wind. The rope tied to the rope is in a butterfly-shaped knot, and the length of the head and the tail is 10~30cm. 6. The sagging height of the tarpaulin on both sides of the truck should be the same. One end of the tarpaulin of the truck manpower brake hangs down to cover the height of the end wall of 300mm to 500mm, and the other end hangs down to cover the height of the end wall of about 600mm. 7. Tighten the tarpaulin corner rope to make the tarpaulin corner unfold inward into a triangle, flatten both sides of the tarpaulin corner and then fold it to the end wall of the truck, wrap the corner tightly at both ends of the vehicle so that the pressing rope presses the corner. 8. The tarpaulins on both sides of the vehicle sag at the same height, the lines on both sides are smooth, the rear side is flat and tightened, and the car number is exposed.

pvc plastic film PVC Tarpaulin is generally used to clear pvc film.

Are you interested in buying ? We also have all kinds of in offer. Visit LINYANG PVC Tarpaulin Film to know more and order, we have them at pocket friendly prices.

The first step toward LINYANG’s successful selling campaign is to understand your customers. What are their needs or desires? Why would they support your product? Even more importantly, why would they be passionate about your product?

ZHONGSHAN LINYANG PLASTIC CO.LTD always believes that the average profitability of our company is sufficient.