Suggestions on improving the method of tarpaulin thatch cover and the method of folding and packing

There are four tarpaulin ropes on both ends of the spot car tarpaulin with a length of 3.5m. The two middle ones are changed from long to short, from thick to thin, and from straight ropes to rope sets. Its circumference is about 1m, and its diameter is 0.7 times the diameter of the existing rope. At present, there are two T-shaped tarpaulin bolts at the beams at both ends of the gondola. Move them from the current position to the upper part of the end plate, about 0.3m away from the edge of the end plate. The two bolts are installed symmetrically, and the distance between them is approximately equal to the distance between the two tarpaulin ropes, about 1.8m. When covering the tarpaulin, first put the ropes at both ends of the tarpaulin on the tarpaulin bolts in the same way, and then pull the two tarpaulins to the middle and overlap each other. After the tarpaulin is covered, tie the rest. Tarp rope. Advantages of the new tarpaulin method (1) Ensure the stability of driving. The two tarpaulin ropes in the middle of the current tarpaulin end edge are fastened near the coupler, which is easy to cause the tarpaulin rope to wrap around the hook rod (pin) and the corner plug door, resulting in the separation of the train or the closing of the corner plug door and other driving accidents. On September 22, 2010, the brake of the train failed due to the tarpaulin rope entangled in the corner plug door, resulting in a dangerous accident of rushing into the signal. (2) Improve the quality of the tarpaulin thatch cover. The improved method puts the noose over the tarp bolt and pulls it taut in the middle. Compared with the current method, the advantages of this method are that the tarpaulin rope is not easy to loosen; the knotting is simple and no rope tail is left; the overlapping length of the two tarpaulins in the middle can be increased, and it is not easy to leak water. (3) It is convenient to expose the brake disc to the outside. (4) Save the tarpaulin rope. Each tarpaulin has 4 tarpaulin ropes from long to short, from thick to thin. There are more than 200,000 tarpaulins and nearly one million tarpaulin ropes in the whole route, which is also a considerable saving. Steps to improve the tarpaulin First, change the tarpaulin bolt of the truck, and then change the tarpaulin rope. The transformation of the tarpaulin bolt can be completed during the section repair, and the transformation of the tarpaulin rope can be completed during the tarpaulin repair. Two-person tents are common tarpaulins, because this tent is very portable, even if three or one person can live. It is recommended that you look for the color of the tarpaulin to choose warm colors such as yellow, orange, or red. When you can't move, the conspicuous color is easy to distinguish. In addition, the tarpaulin also needs to have enough cooking space between the inner and outer tents. Generally, the single space of the tarpaulin is 17 to 20 square feet. The double camp pole is usually relatively strong, but it is not easy to quickly build a camp in strong winds. The tarpaulin must not be washed with a washing machine. And the camp column and the tent are placed separately to avoid puncturing the tent. When storing the tarpaulin, the wet tarpaulin must be spread out and air-dried before being stored. Even if it is not wet during the climbing process, the climber's breath will cause the moisture to accumulate in the tarpaulin, so it is best to spread it out and dry it for a period of time. Collection is better. When the tarpaulin is collected, it is recommended that you fold it irregularly, because the more you use the tarpaulin, the more regular the folding is, which will cause the folds to harden and collapse and cracks. The specific methods of folding and packing the tarpaulin are as follows: 1. Bundle it with a reserved rope, tie the cross on both sides, and tighten it tightly. Good tarp. 2. It is easy to use when folded, and the road emblem and tarpaulin number on the tarpaulin should be completely and clearly exposed for the next use. In fact, the purpose of folding the tarpaulin is to facilitate the handling, number copying, loading, inventory, stacking and storage of the tarpaulin. 3. Spread the front of the tarpaulin flat, remember to leave two end ropes (D type is angle rope), and then fold the two sides of the length direction to the longitudinal center line of the tarpaulin. 4. Then evenly divide the folded two sides into three parts, and fold them twice in a row toward the longitudinal center line. 5. Fold both sides of the tarpaulin in the width direction to the horizontal center line of the tarpaulin, and then fold them in half to the middle twice in a row (three times for the D type), and then press down firmly.

One increasingly popular managerial tactic to improve problem-solving performance of PVC Film is to increase the connectedness, or what academics call clustering, of the organization

Through our culture, our drive and the expertise of each individual employee, ZHONGSHAN LINYANG PLASTIC CO.LTD is uniquely positioned to provide best-in-class services to a global customer base.

Another way to maintain the professional yet engaging innovative technology in PVC Tarpaulin is by embedding new skills directly on manufacturing.

Time is one of the biggest challenges cited by manufacturing PVC Film.

Overwhelming customers with too much information or the slew of benefits PVC Tarpaulin provides–even if they're all valid–is a surefire way to lose their attention.