Precautions for installation and maintenance of

PVC soft board is a kind of high-quality plastic material, which is made by extrusion molding of polyvinyl chloride resin with plasticizer and stabilizer. The surface of pvc soft board is glossy and soft. Wide range of applications. However, if the PVC material is to be soft, it must be thinner. In many cases, the PVC material can be as thin as plastic. Therefore, you must pay attention to this type of product when using it. Today Linyang Plastic Products Co., Ltd. will introduce the use and maintenance precautions of the soft board.

There are also many things to pay attention to when installing PVC soft boards.

1. First of all, note that the cutting should be carried out according to the actual size of the room floor division. When unloading, lay the soft pvc soft board flat on the ground or operating platform, draw a cutting line on the board, and cut it with a V-shaped slit cutter. The edge of the board should be cut into a smooth groove, and the angle of the groove and the opening of the two boards is about 55 degrees. The day before the soft pvc floor is formally pasted, it should be pre-laid according to the grid. When paving, try to take care of the same color tone and the same thickness.

2. The soft board should be maintained regularly, and all kinds of dirt on the ground should be removed in time. To remove the oil, pour the water-based degreaser stock solution on a towel to wipe. Large areas of grease can be cleaned with a floor scrubbing machine; black offset printing can be added by a polishing machine The white polishing pad is polished. For long-time black offset printing, you can pour the strong black offset remover directly on the towel and wipe it; glue or chewing gum, use a professional strong glue remover directly on the towel to wipe off.

3. It is forbidden to soak the floor in water. Although some floors use waterproof glue to block the water source, whoever soaks for a long time will seriously affect the service life of the plastic floor. Use a water absorber to absorb the water in time during the cleaning process.

4. Shorten the maintenance period and increase the waxing frequency of high wall wax for places with a lot of people and wear.

5. It is forbidden to use hard and rough cleaning tools, such as steel wire balls, scouring pads, etc., to prevent sharp objects from colliding with the elastic floor.

6. Foot pads can be placed at the entrances of public places with high traffic to prevent sharp objects from colliding with the elastic floor.

The above is the precautions for installation and maintenance of PVC soft board introduced by Jintiancheng Plastic Products Co., Ltd. The pvc board has excellent characteristics such as soft cold resistance, wear resistance, acid resistance, alkali resistance, corrosion resistance, and tear resistance, and has excellent performance. Weldability and physical properties are better than other coiled materials such as rubber. Used in chemical industry, electroplating, electrolytic cell lining, insulating cushion, train, automobile interior decoration and auxiliary materials. It is recommended that you pay attention to the above precautions when using it to maximize the performance advantages of the material.