Performance characteristics and usage requirements of engineering tents and folding precautions

Requirements for the use of engineering tents: 1. When installing on mud or sand, drain ditches can be dug around the tent to ensure the dryness of the ground inside the tent; 2. If you need to cook in the tent, be sure to keep the flame away from the tarpaulin or use fire The board isolates the flame, and people cannot leave the tent during cooking. Usually, make a plan for fire fighting, and install an exhaust fan to remove the fumes; 3. When the local wind force is predicted to exceed level 8, please remove the tent in advance. so as not to cause unreasonable losses. Even in a windless environment, use ropes and ground spikes to reinforce the tent to prevent accidents. 4. Before storing the cotton tent, be sure to dry the tarpaulin, and then fold it for storage after it is restored to dryness. If it is too late to dry the tarpaulin, remember that it cannot be stored for a long time to avoid coloring and mildew. 5. Depending on the local humidity and climate, dry the tarpaulin regularly to avoid breeding bacteria and damage to the rain-proof coating of the construction tent. Precautions for folding engineering tents: 1. Whether the size of the engineering tent is appropriate, too large or too small will cause inconvenience during use, and if your choice is unreasonable, it may affect the normal performance of the actual function. 2. The tarpaulin of the engineering tent is not as thick as possible. Some consumers will emphasize the thickness more when purchasing engineering tents. In fact, the material of the tarpaulin of the engineering tent is the most important. A set of well-designed engineering tents is not easy to wear and tear. , It is also very easy to clean, and it is not a problem to use it for three to five years. 3. Some engineering tents will be equipped with ground cloth on the ground. When purchasing a new engineering tent ground cloth, you should buy wear-resistant and anti-corrosion products with positioning holes. 4. Now there are some wear-resistant and anti-corrosion floor fabrics designed for engineering tents on the market. These foot pads will be designed according to the actual undulating shape of the tarpaulin on the floor of the engineering tent. The advantage of tailoring is to fit, but there are also disadvantages. First, the production cost is slightly higher. , followed by some shoddy engineering tent fabrics not only can not be fit, on the contrary will affect the overall use effect, so buy good quality engineering tent fabrics produced by regular manufacturers. 5. After installing the new engineering tent floor cloth, try it first. Press the surface of the floor cloth by hand, tear the floor cloth and rub the sample floor cloth to see if they have quality problems; then move the cloth back and forth to see if it will wrinkle and deform; and whether the bottom of the cloth is easy to shift. The performance characteristics of engineering tents: 、Professional engineering tents with thermal insulation are produced by a combination of adhesive bonding and high-frequency heat sealing. The pillars have soft toughness. layer, with a waterproof coated cloth on the outside. This production method makes the engineering tent have good waterproofness. Under the long-term sunlight, the people inside the tent will not feel the troubles caused by the high temperature. , Air permeability In order to make the engineering tent have good waterproof performance, the thickness of the tarpaulin is increased in the composition of the tent to prevent rainwater from entering the interior of the tent. At the same time, considering the flow of air, hemp fabric and cotton cloth are used for the tarpaulin. They are soft and have fine pores, which can fully exchange the air inside and outside the awning. After that, the waterproof coating is evenly spread on the tarpaulin, which keeps the air permeability and also blocks the intrusion of rainwater. Third, aging resistance In order to prolong the service life of the engineering tent, polymer fibers are added to the tarpaulin production process to fuse with vinyl polymers and anti-aging agents, and the fused compound is evenly spread on the surface of the tarpaulin to reduce The occurrence of cloth breakage enhances the toughness of the tarpaulin, making it soft, reducing damage to the fibers inside the tarpaulin during folding, and increasing the number of uses.

Maintaining pvc plastic film is not as easy as it may seem. You have to do plenty of important tasks. So cruel is the truth unless you've got a to help you.

ZHONGSHAN LINYANG PLASTIC CO.LTD, to be the world leader in products, services and solutions that enable and transform the way consumers and businesses gather, manage, distribute and communicate information.

If we avoid overselling PVC Tarpaulin clear pvc film and capabilities, you gain credibility and earn trust. We did not want to jeopardize our ingrained preference for humility.