Military tent customization standard and disassembly method
Military tents refer to tents used by the army and used for military purposes, such as field office, accommodation, storage of materials and equipment during training and wars, and sometimes tents of special materials are directly used to store and cover weapons. Military tents are characterized by simple, convenient, fast, and durable deployment and retraction. Usually, they can be used for 2 to 3 years in the south and 3 to 4 years in the north. According to the thermal insulation effect, it is divided into thermal insulation tents (also known as thermal insulation tents)“cotton”tents) and single-layer tents; divided into military tents, office tents, command tents, accommodation tents, storage tents, sanitary tents, cooking tents; according to the tarpaulin material, it is divided into cotton cloth, chemical fiber cloth, blended cloth, flame retardant cloth and Shielding cloth, anti-infrared cloth, etc.; according to the structure, it is divided into frame tents, straight pole tents, inflatable tents, etc. The main materials of military tents are tent tarpaulins and pole materials. At present, the tent tarpaulin used in my country's military tents is the fourth generation of products, and its quality is not only good in China, but also in China. The first generation tarpaulin is pure cotton canvas, which has good air permeability, but poor waterproof effect, short service life and heavy weight; the second generation tarpaulin is pure fiber canvas, which has long service life, good waterproofness, light weight, but poor air permeability ;The third generation tarpaulin is a blended fabric of cotton and chemical fiber, which has the advantages and disadvantages of both materials, but it is still too heavy; the fourth generation tarpaulin is polyester waterproof canvas, which is light in weight, high in strength, breathable, waterproof, and mildew-proof. , aging resistance and so on. Is it the correct way to disassemble a military tent? 1. First pull out all the nails that fix the outer and inner tents. When the wind is strong, hold the tent tightly to avoid being knocked down by the wind. Camp nails should be handled carefully, do not pull directly with the camp rope, and remember to determine the number of camp nails. 2. Unzip the outer tent and remove the front battalion post. Wipe the mud and moisture off the camp post, carefully pull up the post, and put it in the bag. 3. Remove and disassemble the other battalion column, wipe it clean and put it in the bag. With the tent flat on the ground, it is easier to grab the top of the tent's two ridges. 4. The inner tent and the outer tent should be folded and packaged separately, so that the tent can be easily distinguished next time. When packing the outer tent, first grasp the loop hole at the top to separate it from the inner tent. Be careful not to grab the inner account as well. 5. Pull up the outer tent by pulling the ring hole to make it sag naturally, and fold it into a V shape. Before folding, make sure the tent is dry. 6. Roll up the tent on a dry floor, as tight as possible. Fold in the sides of the tent as you roll, and note that the camp ropes are not tangled together. 7. Swing the inner tent to let the camp rope hang down naturally. Place the inner tent on the ground, roll it as tightly as possible, and hold the side with one hand. 8. Carefully tuck the camp rope into the folded tent, making sure there are no knots or entanglements. If there is a tangle, untie it first. 9. Put the camp nails in a sturdy bag so as not to break the tent, and then put them in the tent bag. If mud or water vapor remains on the camp nails, it may cause embroidery or damage. 10. Dry the camp post, put it in a sturdy bag, and then put it in the tent bag. If the camp pins are kept clean, they can be easily joined the next time they are used. 11. Put the outer and inner tents into tent bags respectively. To protect each component, it is best to pack it in a plastic storage bag. 12. Before tightening the rope of the tent bag, check that all components are in place, and that no camp nails or camp posts are missing.
ZHONGSHAN LINYANG PLASTIC CO.LTD thinks that a good rule of thumb to determine whether you're working on a project.
ZHONGSHAN LINYANG PLASTIC CO.LTD aims to bring quality products of to our customers at affordable prices. We also take pride in offering first-class customer services. You can contact us, no matter what you want to ask us, we will do our best to help you. Website -LINYANG PVC Tarpaulin Film.
ZHONGSHAN LINYANG PLASTIC CO.LTD sells clear pvc film and yet their focus on operational excellence and mastery of distributed manufacturing facilities pvc plastic film has made them the dominant player in the space.
Through our distribution and marketing competencies, ZHONGSHAN LINYANG PLASTIC CO.LTD provides creative, customized, solutions for our customers. As a result, we achieve superior profit growth as the PVC Film company of choice.