Learn about tensile testing of plastic tarpaulins

When using plastic tarpaulins, it is inevitable that the stretching motion is varied to a certain extent. If the performance is not good enough, the tarpaulins may be easily damaged when using them. Therefore, the following plastic tarpaulin manufacturers must test the tensile test of the products. The items to be tested before the test must be placed at room temperature and humidity 50 ~ 100 for 4 hours before the corresponding test can be carried out. For the test method, the tensile strength and elongation at break are measured as standard, sample width 50mm, length 350mm, clamp spacing 200mm, and tensile speed 100mm/min 10mm/min, the calculated result of tensile strength is accurate to 1N, elongation at break keep integers. The plastic tarpaulin should be kept as dry as possible. After finishing the cargo cover, don't forget to hang it to dry. If the PE tarpaulin is a little dirty, just wipe it gently with cold water. If it gets moldy, it will damage the rain and water resistance, so put some washing powder on the sponge and gently wipe the mold. Do not use chemical lotions or rub hard when washing. It can damage the waterproof membrane on the surface of the cloth and reduce the waterproof effect of the tarpaulin.

PVC Tarpaulin has become a standardized way of dealing with pvc plastic film.

ZHONGSHAN LINYANG PLASTIC CO.LTD builds value for our investors through the strength of our customers’ satisfaction and by consistently producing superior operating results.

ZHONGSHAN LINYANG PLASTIC CO.LTD sells clear pvc film and yet their focus on operational excellence and mastery of distributed manufacturing facilities pvc plastic film has made them the dominant player in the space.

PVC Film developed from ZHONGSHAN LINYANG PLASTIC CO.LTD’s unique skills in high technology has helped to produce PVC Tarpaulinclear pvc film.