[Knowledge] Requirements for the use of tarpaulins

Today, the editor of Zhongshan tarpaulin briefly introduces the requirements for the use of tarpaulins. a) It is only suitable for open cars. A car is covered with a tarp. b) The tarpaulin thatch cover is flat and no cargo is exposed. The top is ridged, the corners at both ends are closely attached, and the lines on both sides are smooth. The size of each part does not exceed the limit. c) The rope is tied and tied in the correct position, the knot is firm, and there is no loosening and falling off. The rope tied to the T-shaped iron has a butterfly-wing knot, and the length of the head and tail is 100~300mm. d) The length of the tarpaulin at one end of the truck handbrake hanging down to cover the end plate is less than or equal to 500mm. The hand brake disc of the truck is exposed, which does not affect the use of the hand brake disc and the hook lever. e) The tarpaulins on both sides of the vehicle sag at the same height, and the vehicle number is exposed. 7.2 Thatch cover method a) The front side of the tarpaulin (the waist rope is outward) is covered with longitudinal thatch cover, and the waist rope is on the side of the platform. b) Binding of angle ropes: Tighten the 2 angle ropes at each end of the tarpaulin, so that the tarpaulin corners expand outward into a triangle shape. The cloth corners are flattened on both sides and then folded to the end wall of the truck, tightly wrapping the corners at both ends of the vehicle, passing through the pressing rope, the hand hook or the inner side of the handbrake lever, tensioning in an X-shape, and tying them to the T-shaped irons at both ends of the vehicle. c) Binding of pressure ropes: The pressure ropes at each end of the tarpaulin should be tightened by pressing the corners of the tarpaulin, so that the tarpaulin is close to the end wall of the vehicle, and tied to the T-shaped iron on the side of the vehicle respectively. d) Binding of end ropes: The two end ropes at each end of the tarpaulin should be tightened and closed, passed through the hand hook or handbrake lever, and tied vertically to the two T-shaped irons at the end of the vehicle respectively. e) Binding of waist and side ropes: if there is a T-shaped iron in the middle of the vehicle, the waist and side ropes in the middle of the tarpaulin are tied to the T-shaped iron in the middle of the vehicle; if there is no T-shaped iron in the middle of the vehicle, the waist and side ropes in the middle of the tarpaulin are respectively Tie to a T-shaped iron near the middle of the vehicle. Other waist and side ropes, starting from the two ends of the vehicle, toward the middle of the vehicle, are tied to the corresponding T-shaped irons in sequence. To buy plastic tarpaulins, go to ZHONGSHAN LINYANG PLASTIC CO.LTD, a PVC tarpaulin manufacturer. Website: http://www.linyangpvc.com Keywords: Zhongshan tarpaulin, pvc tarpaulin, plastic tarpaulin

Wow, this sounds like a bit of a cruel question, but it is a vitally important question to ask yourself if you are struggling with your clear pvc film and you would like to stop the PVC Film problem.

ZHONGSHAN LINYANG PLASTIC CO.LTD strives to reflect the highest ethical standards in our relationships with members, providers, and shareholders.

pvc plastic film problems are nothing new, almost every one of us have to go through them at some point of our lives and some of us never get rid of them. with the development of clear pvc film technology, now provides a perfect cure for that.

Depending on the scale of the service, ZHONGSHAN LINYANG PLASTIC CO.LTD might also need to hire and manage an overseas workforce and comply with regulatory requirements.

pvc plastic film has become a serious problem for an increasing number of people around the world, that's why highly effective are developed by ZHONGSHAN LINYANG PLASTIC CO.LTD.