Introduction to the use of tarpaulin

Tarpaulin manufacturers supply 3M*4M, 4M*6M, 6M*8M, 8M*10M, 10M*12M and other specifications blue-white, blue-orange, double-white, double-green, blue-silver and other finished tarpaulins and various specifications of color all year round. Strips of cloth, and custom-made finished tarpaulins of various specifications. Let me share with you the folding method of tarpaulin and the required technology for use. Folding method of the tarpaulin: 1. The front of the tarpaulin is spread out flatly, leaving two side ropes, and folding the two sides of the length direction to the longitudinal center line of the tarpaulin. 2. Divide the folded sides into three equal parts, and fold them twice toward the center line. 3. Fold both sides of the tarpaulin in the width direction to the horizontal center line of the tarpaulin, and then fold them in half to the middle three times in a row and then be firm. The folded outer dimension is about 1000mm×600mm×300mm. 4. Bundle with reserved rope, tie crosses on both sides, tighten and tie firmly, plug the rope end well, and should not loosen and the rope buckle will fall off, and must not be dragged. 5. After folding, the road emblem and tarpaulin number on the tarpaulin should be completely and clearly exposed. Technology required for use: 1. Only applicable to gondolas. A car is covered with a tarp. 2. The tarpaulin thatch cover is flat and no cargo is exposed. The top is ridged, the corners at both ends are closely attached, and the lines on both sides are smooth. The size of each part does not exceed the limit. 3. The rope is tied and tied in the correct position, the knot is firm, and there is no slack and fall off. The rope tied to the T-shaped iron is in the shape of a butterfly wing, and the length of the head and tail of the rope is 100~300mm. 4. The length of the tarpaulin at one end of the truck handbrake sagging to cover the end plate is less than or equal to 500mm. The hand brake disc of the truck is exposed, which does not affect the use of the hand brake disc and the hook lever. 5. The tarpaulins on both sides of the vehicle sag at the same height, and the vehicle number is exposed. 7.2 Thatch cover method 6. The front side of the tarpaulin (the waist rope is outward) is covered with a longitudinal thatch cover, and the waist rope is on the side of the platform. b) Binding of angle ropes: Tighten the 2 angle ropes at each end of the tarpaulin, so that the tarpaulin corners expand outward into a triangle shape. The cloth corners are flattened on both sides and then folded to the end wall of the truck, tightly wrapping the corners at both ends of the vehicle, passing through the pressing rope, the hand hook or the inner side of the handbrake lever, tensioning in an X-shape, and tying them to the T-shaped irons at both ends of the vehicle. 7. Binding of pressure ropes: The pressure ropes at each end of the tarpaulin should be tightened by pressing the corners of the tarpaulin, so that the tarpaulin is close to the end wall of the vehicle and tied to the T-shaped iron on the side of the vehicle. 8. Binding of end ropes: The two end ropes at each end of the tarpaulin should be tightened and closed, passed through the hand hook or handbrake lever, and tied vertically to the two T-shaped irons at the end of the vehicle. 9. Binding of waist and side ropes: If there is a T-shaped iron in the middle of the vehicle, the waist and side ropes in the middle of the tarpaulin are respectively tied to the T-shaped iron in the middle of the vehicle.

ZHONGSHAN LINYANG PLASTIC CO.LTD devises a regular, independent, transparent and objective assessment mechanism to evaluate country performance.

If you are looking for a reputable PVC Tarpaulin pvc plastic film, you are on the lucky side as we are among the leading supplier in China. Visit the given links LINYANG PVC Tarpaulin Film to know more.

As consumers get more and better information regarding how to compare various products and companies, it is critical to compete on the price and value of PVC Film.