How to support and fix the tarpaulin? -News Center-Lin-Yang dishcloth factory

How to support and fix the tarpaulin? How to support and fix the tarpaulin? After the tarpaulin account is rolled out, the four corners of the internal account should be fixed first, so that the bottom of the account can be leveled on the ground. If conditions permit, the bottom of the account can be padded, so that the bottom of the account can be maintained, the best waterproof effect can also be achieved. When supporting the external account, in addition to the reliable connection with the Peng Rod, pay special attention to pulling the rope to make the external account tight, so that the external account can reach the best rainproof, and the account with the skirt is pressed with soft soil or sand, snow pressure can also be used in winter, which is more conducive to wind prevention. The fixing of the nail should have an inclination angle, and the point of view should be 35- 45 degrees is appropriate, the interval and direction of the nail into the ground and the rope should be the same axis, the rope and the nail into a 90 degree angle, which is conducive to reaching the maximum stress strength. In the fixed order, attention should be paid to the corresponding fixation. For example, the Left Front angle, the right back angle, the right front angle, and the left back angle. After the entire account is fixed, the tie rope is adjusted to make the pull force of all aspects common. After supporting the account, check the interval between the internal and external accounts. If it is attached together, it will affect rain and dew prevention and should be adjusted.