Glue stick protective film places?

The labels, or protective film, adhesive tape, tear hereafter have residual offset printing, can try the following method: method 1: use contains salicylic acid methyl ester substances such as wind, cooling oil, alcohol, substances such as petrol wipe the viscose. Method 2: blow drying heat, soften the 3 m tape, it is better to tear. Also is to use a stiff paper knife ( Pen knife) And gently scrape. Method 3: home new buy stainless steel pot or always with some label on the glass ware, tear off label, after those 3 m tape traces of it is difficult to remove, wipe with wet cloth, knives scraping tend to leave traces, after a lot of practice, I summarized some tips to share with you. Method 4: traces on the surface of the adhesive for hard objects, we can use oil free of besmear nail polish remover on surfaces, and then with a soft cloth to wipe gently; Use industrial alcohol or gasoline can remove the marks. If these stickers to skin, and can also use a lemon juice to remove. Method 5: in addition, the hand cream can also be to remove the effect of 3 m tape, hand cream contains a lot of water, In more than 70%) , the water contains a certain amount of surfactant. Surfactant has good wetting, penetration, dissolving ability, can quickly permeate between adhesive and surface, thus achieve the purpose of clearing. You can also find some similar products, such as creams, lotions, washing spirit also has the same effect. Methods 6: for carpet is stubborn double-sided tape, the best way is to put the carpet nap at the top of the stickers carefully mark cut off. Anyhow method is a lot of, use your head to think, at the same time to try, maybe you can find a way to more to remove residual glue.