Conformance standards and specific requirements for the use of engineering tents

Requirements for the use of engineering tents: 1. Tent site selection In order to provide people with a comfortable resting place, the site selection of engineering tents is particularly important. Therefore, the project tent should be built in an area with open and flat terrain and no rainwater accumulation, so as to prevent the tent from being soaked by water and unable to keep dry, and such an area is generally mud or sand suitable for construction. Require. After deciding to station, a drainage ditch should be dug around the tent to avoid the accumulation of rainwater and affect the drying of the resting environment in the tent. 2. The problem of tent reinforcement Even if you use a high-quality engineering tent, you can't take it lightly after it is set up, and you still have to do a good job of reinforcement. And the construction process needs to be carried out in strict accordance with the steps, which can ensure the firmness of the tent to the greatest extent. In order to cope with harsh weather conditions such as outdoor thunderstorms, the tent is fixed on the heavy object with a drawstring, and the ground nails should also be reinforced, so as to effectively prevent the tent from being blown away by strong winds. 3. The problem of storage tents It has to be said that the storage problems of engineering tents are also very important, and even affect the effect of the next use. Therefore, consumers should not put it directly in the corner after use, but can store it after finishing the work of drying. And it needs to be exposed to the sun for a while before folding, until it dries before putting it away. If it is not stored as required, over time, bacteria will grow and mildew will make the tent unusable. 4. Ensure the dryness of the ground inside the tent When working outdoors, the project tents built have become a place for people to rest. Only by keeping the tent dry can the body be relieved. The choice of the station is the key. Choosing an open and flat area as a campsite can quickly remove excess rainwater. Generally, mud or sandy land is chosen as the stationing place. By digging drainage ditches around the tent, the accumulation of rainwater can be prevented from affecting the dry feeling inside the tent. 5. Use ropes and ground nails to reinforce the tent. When setting up the tent, insert the skeleton into the corresponding part, and strengthen and fix it at the connection place. For engineering tents, you can first install the top of the tent, install the herringbone beam, then zip up the zipper, then set up the tent, and then cover it with a greenhouse. After completing these steps, insert the two poles of the tent and install the ground beam pipe. Then fix the corners of the tent with a drawstring and tie it to the heavy object, and the ground nails assist in the reinforcement to prevent the bad weather outdoors from affecting the use of the tent. 6. It needs to be aired before being folded and stored. When people finish using the tent, they should air it before storing it. People use professional engineering tents outdoors to enjoy a comfortable living environment. In order to allow it to be used multiple times, let it dry in the sun for a period of time before folding, and then store it after drying. If you can't wait for the project tent to dry, store it for a short time and then take it out to dry to prevent staining and mildew, which can breed bacteria and corrode the tent. Project tent conforms to the standard: , The tarpaulin material is dense and has good waterproof and breathable properties. Since the tent is mainly used outdoors, the requirements for waterproof and breathable are also relatively high. The tarpaulin used in the project tent must meet the standard of compactness and sturdiness, and the fabric used has good heat insulation and water resistance, so that it can withstand the attack of heavy rain and the exposure of the scorching sun. , The tent is of suitable size and has wear resistance. Qualified engineering tents will have enough space to accommodate people, and the capacity of this space meets the specified standards. If the size of the tent is lower than the specified standard, it will affect the effect of actual use and the play of its role. And the durable engineering tent will be equipped with a ground cloth with strong wear resistance to improve the use effect of the tent. Third, the color of the tent has a great contrast with the surrounding environment Although the color of the tent is often ignored by people, in fact, the color is very important for the function of the engineering tent. Because engineering tents are used outdoors, if you choose a tent with a similar color to the surrounding environment, it is not easy to be found, which is not conducive to people's identification. Therefore, the color of a suitable project tent should meet the standard of contrast with the surrounding environment.

is emerging as one of the most popular PVC Tarpaulin, moving beyond its pvc plastic film benefits, with conclusive scientific evidence suggesting the positive role play in clear pvc film.

The 21st century is sure to bring more innovation, new services and newer technology, thus new products and services to sell. ZHONGSHAN LINYANG PLASTIC CO.LTD will continue to shape and lead the markets in which it chooses to compete.

When selecting the best products for customers, we considered not only the PVC Film, but also the pvc plastic film.

More than half of customers said they have faith with ZHONGSHAN LINYANG PLASTIC CO.LTD and PVC Tarpaulin.

The first step toward LINYANG’s successful selling campaign is to understand your customers. What are their needs or desires? Why would they support your product? Even more importantly, why would they be passionate about your product?