Coating method in PE tarpaulin processing1

In the production process of PE tarpaulin, in order to improve the performance of the tarpaulin, it is necessary to use some additives, and the coating method is a processing method of additives. It is necessary to clean first, mainly in order to obtain a uniform and dense film of antistatic agent. Before applying antistatic agent, the surface of the material must be cleaned to thoroughly remove surface dust, grease, etc. After cleaning, it needs to be placed in a clean room to dry. . Then, the antistatic agent is prepared into a solution with a concentration of 0.2-2% with ethanol, esters or water. The concentration of the solution should be as thin as possible under the premise of ensuring the antistatic effect, because the solution with high concentration will Sticky, easy to absorb dust. For coating, the coating method is selected according to the shape of the product. Commonly used coating methods include direct method, dipping method and spraying method. The direct method is to apply the antistatic agent liquid on the product with tools such as cotton cloth, flannel, brush and roller. After drying, the coated product should be fully dried to harden the coating layer. Under the conditions of temperature of 30-40 degrees Celsius and humidity of 60-80%, it takes about 3 hours to dry. Pay attention to the natural environment after drying. left for 5 hours.

ZHONGSHAN LINYANG PLASTIC CO.LTD is devoted to satisfy our customers with a wide array of the finest using experience.

If PVC Film isn't meeting your needs, or you just want to see what else is out there, check out these content monitoring alternatives LINYANG PVC Tarpaulin Film.

pvc plastic film PVC Tarpaulin offer a wide range of clear pvc film and gave the user the choice of pvc plastic film, clear pvc film and pvc plastic film.