Anti-static finger

Many friends have little knowledge of the anti-static finger cuff, and they are not very clear about its practical methods, today, I will give you an in-depth analysis of the practical tips of the anti-static finger cuff, so that you can be more handy when using the anti-static finger cuff in the future.

Anti-static finger cuff performance: surface resistance 10 6-10 ^ 9Ω; Electrostatic decay time <0. 1sec charged charge <0. 3μc/pair washing times: Grade A>100 times; Level B>50 size S (Small), M (Medium), L (Large) Generally, anti-static finger sleeves are used for anti-static and clean dust-free workshop environment that requires glove operation. Protective film manufacturer ichuan film 4006666322 wearing anti-static gloves can prevent the operator's fingers from directly contacting the electrostatic sensitive components, and can safely discharge the static charge of the human body carried by the operator, which is the characteristic of the anti-static finger sleeve. It is necessary for the staff of the semiconductor industry, the optoelectronic industry, the semiconductor manufacturing industry, the electronic picture tube manufacturing industry, the computer motherboard manufacturing enterprise, the mobile phone manufacturing plant, etc. to wear when working. These practical tips for anti-static finger sleeves are very important, and it is also convenient for later work if you know them when using them. 1. If the anti-static finger cuff is used for waterproofing, please check whether there is air leakage, blow a breath into the finger cuff, and then pinch the mouth to see if the cuff becomes smaller. If it does not change, it means no air leakage and can be used. 2. Moreover, the anti-static finger cuff cannot be worn for a long time. If you feel that your fingertips are swollen, numb and purple, you should take it off immediately and raise your fingers to recover slowly. This practical tip of the anti-static finger cuff must be remembered, it will affect your body if you don't pay attention. 3. After use, put it in a cool and dry place so that it can be used repeatedly. 4. When it is not easy to wear for many times, you can put some prickly heat powder or talcum powder to lubricate.

5. When you take it, roll it up and down, so that it is easy to break and easy to wear next time.