A brief introduction to the construction and maintenance of engineering tents

Before we set up, we first decided where to set up the project tent. According to the order, 2 people worked together, and it didn't take much time to set up easily. The following takes one of the basic engineering tents, a house-type engineering tent that has been quite popular since ancient times, as an example to illustrate the erection method of engineering tents. 1. The decision of the location After considering the wind direction and terrain, choose a flat place. 2. Inspection of engineering tent equipment Pour out the items stored in the bag, and check each part one by one. Accessories include: four windproof ropes, 12 ground pegs, 2 aluminum poles, inner and outer tents. 3. Lay the floor mat in a place with a lot of humidity, first lay the mat, and then lay the mat on it. Then lay the inner tent on top. 4. Erect the pillars, hang the hooks and place the aluminum rods crosswise, insert the four ends into the rivets on the four corners of the inner tent, support the inner tent from bottom to top, and place the inner tent on the inner tent along the aluminum rods. The hanging buckle of the tent is hung on the aluminum pole, and then the rope at the top of the inner tent is tied at the intersection of the aluminum pole, and the four corners of the project tent are fixed with ground nails. It should be noted here that the ground nails should be inserted into the soil obliquely. This is both labor-saving and sturdy. 5. Install the outer tent, cover the outer tent on the inner tent, adjust the ground nails at the four corners, open the window, and fasten the locks at each corner to connect the inner and outer tents. Then fix the ground pegs on the front door. 6. Four windproof ropes. Secure with ground nails. Well, the construction of the engineering tent is that simple. Enjoy the beauty of outdoor construction. In addition, we need to pay attention to the following points when setting up the project tent: 1. The entrance of the project tent should be leeward, and the project tent should be kept away from the hillside with rolling stones. 2. In order to prevent the tent from being flooded when it rains, a drainage ditch should be dug directly below the edge of the tent roof. 3. The four corners of the project tent should be pressed with large stones. 4. Air circulation should be maintained in the project tent, and fire should be prevented when cooking in the tent. 5. Before going to bed at night, check whether all the flames are extinguished and whether the tent is fixed and firm. 6. The project tents should be built in sequence. If you want the project tent to be used for a long time, in addition to choosing good quality when purchasing, it is also very important to pay attention to maintenance during use. 1. The tarpaulin is damaged. Avoid using sharp objects when opening the package, so as not to scratch the tarpaulin. During use, the tarpaulin cannot be dragged on the ground. When the tarpaulin is damaged, it will lose the function of sunshade and rain protection. In order not to affect the normal use, you should buy a new one in time. 2. The tarpaulin is moldy. Although this does not affect its normal use, it can be cleaned with warm soapy water for the sake of beauty. (Unlike the principle of clothes, they cannot be put into the washing machine for cleaning.) After the project tent is cleaned, it should be dried in a ventilated place before being stored. (Do not expose to the sun, which will accelerate the aging of the tarpaulin.) Third, if the bracket is rusted and used outside, it will inevitably encounter rainy days. If you want to avoid this, choose a stainless steel bracket at the time of purchase. Stainless steel is the abbreviation of acid-resistant steel, which is resistant to weak corrosive media such as air, steam, and water, or varieties with stainless properties; it can effectively prevent rainwater from being eroded when used. Fourth, the bending of the bracket causes this situation not to be of poor quality, but because many people do not understand its operation method and use too much force when opening it, so it is very important to learn to use it. The Dolly Color Tent Factory supports are manufactured with all specifications and weights up to the standard, and can be used even in the face of strong winds. 5. Damaged accessories Check which accessories are damaged (cross tube, ejector rod, movable buckle, spring, upper thigh rack, lower thigh rack, center upper tube, center lower tube, ejector bar), you can buy the accessories separately at Dolly Color and go back Install. Engineering tents are often used outdoors. You may ignore the above major problems in use. If you want to use them for a long time, good maintenance is important.

Competitiveness policy of ZHONGSHAN LINYANG PLASTIC CO.LTD is about existing clusters as a platform for upgrading microeconomic fundamentals, where structural policies aim to change the industrial composition of an economy more directly.

More about the most suitable , visit LINYANG PVC Tarpaulin Film to get your offer!

To stay in contact for latest review of PVC Tarpaulin clear pvc film across the globe and find out quality products, just go to LINYANG PVC Tarpaulin Film.