Tarpaulins tensile test and the largest natural enemies

In the use of tarpaulins, is unable to avoid them for different levels of stretching, if performance is not superior in this regard, is likely to make tent is easy to be damaged when using. Linyi tarpaulin factory by tarpaulins tensile strength tests to grasp the quality of the product, and take reasonable measures to improve it. The preparation before the test: test items must be in the normal temperature of 23 ℃ + 2 ℃, humidity, 50±5） % environment for 4 hours, and then the corresponding test. Test method: determination of tensile strength and elongation at break should be in accordance with the standard HG/T2580, specimen width of 50 mm, length is 350 mm, the fixture distance is 200 mm + / - 1 mm, stretching rate of 100 mm/min + 10 mm/min. Calculation results, accurate to 1 n tensile strength, elongation at break into integers. Tensile strength index for by the strength of 2100 n / 5 cm or more weft to a strength of 1600 n / 5 cm or more. The determination of tensile force should be in accordance with the standard HG/T2581 adopts double tongue single tear method, sample size is 225 mm long, wide 75 + 0. 5mm。 Test eligibility criteria: the extraction of three volumes product testing, a volume is unqualified, again from the original batch extraction volume 6, retest, if more than three volumes is unqualified, assesses this batch product is unqualified. Tarpaulins biggest enemy is hard with sharp, so be careful when using, if encounter needle, wire etc will prick tarpaulins, if encounter this kind of circumstance, the proposal immediately with tarpaulins repair glue ( Adhesive) Restored, immediately, in case to expand. Contact: manager zhao http://www. linyangpvc。 Com/tarpaulin, tarpaulin factory telephone: 13754728822 WeChat ID: 13754728822