Precautions for tarpaulin production-News Center-Lin-Yang dishcloth factory

Precautions in the production of tarpaulin has a waterproof effect and is often used in industrial industries, agricultural industries, food industries and other industries. The production steps of tarpaulin determine the quality of tarpaulin produced, tarpaulin manufacturers should pay attention to the production of tarpaulin. 1. For the technology of splicing the middle seam: quality requirements, cloth delivery, cloth pulling, gun head pulling and gun head pulling should be prepared in place, dripping water must be made, and the temperature should be adjusted moderately, if it is too high, it will be lowered. If it is too low, it will need to be raised. The burning hole should be cut open and straightened, respliced, and re-spliced if it is not stuck. 2. When the cloth is taken and opened, it is necessary to strictly check whether the material has seam opening, film removal, damage, hole breaking, thin weft, wire jumping, etc. If it is, it needs to be cut and spliced. 3, blanking, if there is no problem after the end of the fabric inspection, you need to measure the cloth, before cutting, you must be straight, the size is accurate according to the requirements, each piece must be clearly marked, moreover, it should be noted that the original leader should be found and connected before each blanking, and the blanking should be carried out according to the requirements on the order. Only one leader can be left for each color and specification. Once there is no order, quickly organize the workshop, classify, splicing, and neatly classify the remaining heads. The above is the introduction of the precautions in the production of tarpaulin. If there are other problems, please feel free to contact us and look forward to your call!