An expert in PVC tarpaulin / PVC film industry since 2002

English

PE protective film (Optical grade)

by:LINYANG     2019-12-27

Optical PE protective film

Optical PE protective film

1. Composition PE substrate PE base adhesive layer adhesive layer antistatic treatment (Optional) Antistatic coating (Yes/No)2. Features: PE film is used as the carrier, and acrylic glue and anti-static electro-hydraulic adhesive are used on one side. It is used to protect some bright metals, plastics, glass materials, etc. In addition to its ability to absorb dust, this protective film also has the function of preventing dust and impurity adsorption, but also a protective material that can prevent electrostatic damage and has an antistatic effect. 1. There is no electrostatic material migration on the surface of the antistatic protective film. 2. No primer treatment is required to exert excellent adhesion to the adhesive. 3. The material is more flexible, and the effect is good, and it is suitable for the surface with curved curvature. 4. Surface resistance 109-1011, environmentally friendly, non-toxic and tasteless. 5. Excellent anti-static effect and stable performance. 3. Applications: suitable for panel protection, such as bright metal, plastic, glass and other photoelectric materials; Composite materials are very suitable for electronic manufacturing and processing industries. 4. Technical parameters Technical Data product physical material substrate (mm)Total thickness of glue system (mm)Stripping force (g/in)Impedance value applicable temperature (℃)0. 05 ~ 0. 2 acrylic acid 0. 05 ~ 0. 23 ~ 800109- 10110 ~ 60

1. The applicable temperature is the applicable ambient temperature after the tape is attached (For reference only) , Specific to be attached/material and attached conditions, etc. , please use the user to evaluate. 2. This table is the guide for purchasing PE series, and needs to cooperate with the actual measurement data standards of each engineering unit. 3. Test Environment: temperature 23 ℃-25 ℃, humidity 50%-60%. 4. Test method: the peeling force is GB/T2792-2014. 5. Bonded body: stainless steel plate, tape width: 300, stretching speed: 180 mm/Min, stretching angle. 5. Application technologes1. Remove the oil, moisture, dust and other debris on the surface of the sticker. 2. Due to the use of pressure-sensitive adhesives, it is necessary to use a roller or stamping equipment to fully press the paste. 3. Since the adhesive force of the adhesive tape itself needs a certain amount of time to be fully exerted, please be careful not to bear greater pressure on the adhesive tape for at least a few hours after pasting. 4. When using, please pay attention to the initial adhesion and aging changes, and make sufficient prior confirmation. The product is valid for 6 months from the date of manufacture.

Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...