Introduction to the production process of waterproof tarpaulin

There are two production processes for waterproof tarpaulins. One is horizontal machine production, which is the kind of heavy-duty large cylinder. After the tarpaulin is put into the material, it is placed on the belt and pressed and flattened by the bottom of the heavy-duty large cylinder. , then pull on the dryer to dry, then trim, divide and pack. One is vertical machine production, straightening the cloth into the raw material box and pulling it out. The glue material on the sheet is high-purity PVC material, and then both sides are straightened through the machine and scraped with a knife. After drying, it is dried in a dryer, trimmed, divided into circles, and packaged. There are two types of dryers, one is electric burning and the other is boiler. The PVC plastic-coated tarpaulin produced by the horizontal machine is cheaper than the PVC plastic-coated tarpaulin produced by the vertical machine. The reason is that the production raw material requirements of the horizontal machine are lower than that of the vertical machine. Any kind of rubber compound can be put on it for pressing, but vertical machine production is not possible. The requirements for raw materials are high, and the raw materials must have a certain degree of purity. PVC tarpaulins produced by vertical machines are often slightly more expensive, and the purity of tarpaulin products is also high.
If you are looking for convenient, affordable , LINYANG brings plethora of options to suit your requirements and budget both. Check LINYANG PVC Tarpaulin Film for more details.
ZHONGSHAN LINYANG PLASTIC CO.LTD’s goal is to achieve customer satisfaction through excellence in design, supply chain management, manufacturing and repair solutions.
Utilizing high technology to manufacture products can afford a fully experience to customers by using PVC Film.