_ industry dynamic truck tarpaulin five-step film covering method

Tarpaulin film covering method is critical for the use of tarpaulins, responsible for personnel must pay enough attention to, the following we know together. 1, tent positive ( The waist line outward) Longitudinal film covering, waist line at the side of the platform. 2, Angle rope tied: tarpaulins each side 2 Angle rope tension respectively, make the tarpaulins Angle outward expansion into triangular shape. Cloth Angle after the two sides pressing bends to the truck end wall, in tight Angle on both ends of the vehicle, through the pressure line, hand hook or inside of the hand brake lever, the X taut, binding t-bar on opposite sides of the vehicle, respectively. 3, waist and rope tied: among vehicles have the t-bar, tent in the middle of the waist, rope tied up in the middle of the vehicle on the t-bar respectively; No t-bar among vehicles that tent in the middle of the waist, rope tied respectively near the vehicle in the middle of the t-bar. Other waist, rope, from the start on both ends of the vehicle, toward the central vehicle, order bundles on the t-bar accordingly. 4, the rope tied: tarpaulins 2 per side side rope, should tighten convergent, through the mobile hook or hand brake lever, respectively, two vertical tied up at the end of the vehicle on the t-bar. 5, rope bound: tent rope, each side pressure should pin tarpaulins Angle taut, make the tent close to the vehicle side wall, bundled separately on the vehicle lateral t-bar. Tarpaulin, http://www. linyangpvc。 Com/safe use is very important, we will hold a better film covering method to do our job.