How to solve the unevenness of tarpaulin -? News Center-Lin-Yang dishcloth factory

How to solve the unevenness of tarpaulin is widely used in our life. Tarpaulin will appear unevenness when it is used, which will affect our normal use, the tarpaulin manufacturer said how to solve the uneven phenomenon of tarpaulin. The main reason for this phenomenon is the imbalance of latitude and longitude tension, and the common methods to solve this problem are: 1. Adjustment of weft tension: the tension of the weft is greatly affected by the size of the shaft wire, and the tension adjustment of the weft wire is mainly to adjust the tightness of the tension brush Spring, which is really difficult to adjust to balance. It is recommended to improve this adjustment method, such as increasing the friction tension of the end face. 2. Adjustment of Warp tension: the adjustment of Warp tension is mainly the guide wire holes, warp feeding rollers and jump rods passing through Warp frames and flat wires. The rotating resistance moment of the pallet shaft of each spindle of the warp frame is the birthplace that directly affects the Warp tension. In addition, attention should be paid to whether there is flat wire winding on the shaft to increase the rotation resistance torque, and whether there is edge wrapping wire to make the rotation resistance torque unbalanced. Jump bar adjustment is the most important. First of all, each jump bar should rotate flexibly and not be stuck by dust and greasiness. Several or more than a dozen jump bars should rotate together, if necessary, it is recommended to use an isolation ring to isolate each jumper in order to increase the activity capacity. The above is the introduction of the method to solve the unevenness of the tarpaulin. If there are other problems, please feel free to contact us and look forward to your call!