Introduction to the method of supporting and fixing the tarpaulin

When the products of tarpaulin manufacturers are used, they should choose a relatively flat area, and the ground should be relatively dry. After the tarpaulin is rolled out, the four corners of the inner tent should be fixed first, so that the bottom of the tent is laid flat on the ground and fixed firmly, and a floor mat can be placed under the tent, which can not only protect the bottom of the tent, but also achieve the best waterproof effect. When supporting the outer tent, in addition to the reliable connection with the tent pole, special attention should be paid to pulling the rope to make the outer tent taut so that the outer tent can achieve the best rain resistance. For tents with skirts, soft soil should be used. Or sand and soil pressure is good, and snow pressure can also be used in winter, which is more conducive to wind protection. In the fixed order, attention should be paid to the corresponding fixed. After setting up the tent, check the distance between the inner and outer tents. If they are attached together, it will affect the rain and dew protection, so be sure to adjust them well. Generally speaking, the main raw material for the production of tarpaulin is Oxford cloth or PVC material. If it is only used alone, it is a bit wasteful relative to the characteristics of this material. In the utilization of tarpaulin, the utilization rate is not particularly high. Generally, it is useless after one or two use, and it is thrown away directly, which is too wasteful.
If you are looking for convenient, affordable , LINYANG brings plethora of options to suit your requirements and budget both. Check LINYANG PVC Tarpaulin Film for more details.
To be the safest, most progressive domestic PVC Tarpaulin, relentless in the pursuit of customer and employee excellence.
ZHONGSHAN LINYANG PLASTIC CO.LTD employs a group of professional staff, enhancing the function of PVC Film.